Large Liquid Nitrogen Storage Tank - LNG Cylinder Cryogenic Vehicle Tank Gas Cylinder – Hansheng

LNG vehicle cylinder (high vacuum multilayer insulation cylinder) by a stainless steel liner, the housing, high vacuum multilayer insulation interlayer, carburetor air temperature, and the water bath vaporizer safety valve piping system, whose unique and advanced adiabatic process, structure Safe and reliable, it is the core equipment of the gas supply system for LNG fuel vehicles such as heavy trucks and intercity buses. The LNG fuel vehicle that uses the gas cylinder as the fuel storage tank not only has the incomparable advantages of fuel vehicles in terms of economic and environmental benefits, but also has high energy density and long driving range, which is of great significance for saving energy and improving urban air quality.

Video

Parameter

Product details

Product process

We guarantee the quality of our products,if you bought our products,whenever you have any question about our products, please tell us,we will never caused products trouble for any customers.

Product Advantage

①The storage pressure is low, the container is relatively light, the storage capacity is large, and the storage and transportation are safe and convenient;

②High energy density, fast filling time, long driving mileage (600~800km);

③The LNG refueling station has a small footprint, simple construction, low investment, low power equipment energy consumption, and low operating cost;

④ LNG is transported by special tankers, and the construction of the station is not restricted by the natural gas pipeline network, which is convenient for the station layout;

⑤For urban gas operations, replacing CNG to a certain extent can ensure gas supply to pipeline users.

Quality Control

All the manufacturing technology and properties tests are entirely under the supervision of the third-party supervision institute approved by the General Administration of Quality Supervision, Inspection, and Quarantine of China.

Package&Delivery

Factory

Our products are exported to more than 30 countries and regions such as Germany, France, Sweden, Japan, Russia, etc…

FAQ

Pressure in the container is low.

1) Refer to the instruction manual and use according to the recommended maximumgas withdrawal rate and supercharging capacity

2) Open pressure building regulator or pressure building valve

The cylinder is filled but no pressure display

1)Change the pressure gauge

2)change the rupture disk

3)Repair or replace the valve

The bottom of container covered with spiral frost

It is normal

The top of container covered with frost

1)Check the leakage of the liquid level gauge connection, replace the seal washer, re-install and do air tight test after the pressure is empty

2) Tighten joint and do air tight test